q Input signal indicator
The respective indicator will light corresponding to the
input signal.
w Input signal channel indicator
The channels included in the input source will light.
This lights when the digital signal is inputted.
e Information display
This displays the surround mode, function name or setting
value, etc.
r Output signal channel indicator
The audio channels that can be output light.
t Speaker indicator
This lights corresponding to the settings of the surround
speakers of the various surround modes.
y Decoder indicator
This lights when each decoder is operating.
u Master volume indicator
This displays the volume level.
The Setup item number is displayed in System Setup.
i IEEE1394 indicator
This lights during playback in a IEEE1394 connection.
o Multi (zone) indicator
ZONE3 mode is selected in ZONE3/REC SELECT.
!0 Recording output source indicator
REC OUT mode is selected in ZONE3/REC SELECT.
!1 DENON LINK indicator
This lights during playback in a DENON LINK connection.
!2 AL24 indicator
The AL24 indicator lights when the PURE DIRECT, DIRECT,
STEREO, MULTI CH PURE DIRECT , MULTI CH DIRECT,
MULTI CH IN mode is selected in the PCM input signal.
!3 Input mode indicator
This lights corresponding to the setting of the INPUT mode.
!4 RDS indicator
This lights when RDS broadcast has been received.
!5 AUTO indicator
This lights when the broadcast station is selected in the
AUTO tuning mode.
!6 TUNED indicator
This lights when an FM/AM broadcast has been received.
!7 STEREO indicator
This lights when an FM stereo broadcast has been received.
Display
To Next Page
Loading...
Need help?
General
