Denon AVR-4806 - Basic Operation: Radio Presets; Preset Memory Operation Guide; Checking Preset Stations on OSD; Recalling Preset Stations

66
Basic Operation
Preset memory
1
Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in
the memory.
2
Press the TUNER button to
select the TUNER mode.
3
Press the MEMORY button.
4
Press the MEMORY BLOCK (A to G) button.
The memory block can also be selected by pressing
the SHIFT button.
5
Press the CHANNEL button to select the
desired preset channel (1 to 8).
6
Press the MEMORY button again.
•Store the station in the preset memory.
•To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
Checking the preset stations
• The preset (broadcast) stations can be checked on the on
screen display.
Press the ON SCREEN button repeatedly until the
“Tuner Preset Stations” screen appears on the
OSD.
Recalling preset stations
2 Recalling preset stations from the remote
control unit
•Preset stations can be chosen directly preset channel and
channel range button ( page 72).
1
Select the MEMORY BLOCK (A to G).
2
Watching the display, press the CHANNEL
button to select the desired preset channel.
FUNCTION
TUNING PRESET
TUNER
CHANNEL
RDS
SHIFT
ON SCREEN
MEMORY
MEMORY
BLOCK
FUNCTION
SOURCE
(Remote control unit)