• High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold DENON LINK
compatible DVD player.
• Digital transfer and multi-channel playback of DVD Audio discs and other multi-channel sources is possible by connecting the
AVR-4806 to a DENON DVD player equipped with a DENON LINK connector using the connection cable included with the DVD
player.
• When a DENON DVD player and the DENON LINK have been connected, be sure to make a setting to “DENON LINK” with
the System Setup Digital In Assignment ( page 90).
2 DENON LINK 3rd Edition:
Super Audio CDs have certain rules for digital signal transfer designed to protect copyrights. In order to receive permission
for the transfer of the multi-channel digital signals of Super Audio CDs, DENON has proposed to Super Audio CD licensors
and content holders the DENON LINK (3rd Edition), and approval procedures are now underway. Once these approval
procedures are completed and official approval for the digital transfer of Super Audio CD signals with DENON LINK is received,
it will be possible to transfer the digital signals of Super Audio CDs to the AVR-4806 from players equipped with DENON LINK
(3rd Edition).
•With discs on which special copyright protection measures have been taken, however, the digital signals may not be output
from the DVD player. In this case, connect the DVD player’s analog multi-channel output to the AVR-4806’s EXT. IN terminals
for playback.
Also refer to your DVD player’s operating instructions.
To Next Page
Loading...
Need help?
General
