Denon AVR-4806 User Manual

68
Basic Operation
4
Press the CHANNEL button.
• Automatically begin the PTY search operation.
If there is no station broadcasting the designated
program type with above operation, all the reception
bands are searched.
The station name is displayed on the display after
searching stops.
PTY search
1
Set the input source to “TUNER”.
2
Press the RDS button until “PTY SEARCH”
appears on the display.
The main unit’s display switches as follows each time
the RDS button is pressed.
• Use this function to find RDS stations broadcasting a
designated program type (PTY).
• For a description of each program type, refer to “Program
Type (PTY)”.
RDS SEARCH PTY SEARCH
RT ON TP SEARCH
Display
3
Watching the display, press the CURSOR
FF
or
GG
button to call out the desired program type.
5
To continue searching, repeat step 4.
If no other station broadcasting the designated
program type is found when all the frequencies are
searched, “NO PROGRAMME” is displayed.
FUNCTION
CURSOR F CURSOR G
CHANNEL
RDS
CURSOR
G
CURSOR F
FUNCTION
SOURCE
(Main unit) (Remote control unit) (Remote control unit)

Denon AVR-4806 Specifications

General

Brand	Denon
Model	AVR-4806
Category	Stereo Receiver
Language	English