19
Preparing the Material
STEP 1 : Attach the Material to the Scrap Board
Scrap Board
A scrap board is a board that is placed under the material when cutting it so
that the table is not cut.
It is used as a temporary, subsidiary material when cutting out the material
or when drilling holes for positioning when cutting.
" User’s Manual “Cutting Material / Scrap Boards”
Procedure
1. Mark the location that will be the origin point of the scrap board.
Draw the diagonal line and mark the center point of the scrap board.
2. Stick double-stick tape on the scrap board.
An adhesion side is made large so that the scrap board may not separate
during cutting.
●〇〇〇〇〇
To Next Page