DGSHAPE monoFab SRM-20 - Guide for Cutting with MODELA Player 4

Guide for Cutting with MODELA Player 4
The Flow of Double-Sided Cutting ................66
The Flow of One Side Cutting ..............................66
Items Necessary for Cutting .....................67
Items to Prepare Yourself ................................... 69
Creating a MODELA Player 4 File..................70
STEP 1: Load the Cutting Data ..............................70
STEP 2 : Set the Machine Selection .........................70
STEP 3 : Set the Origin Point of the Model
and Orientation ...........................................71
STEP 4 : Set the Material .................................... 72
STEP 5 : Set the Number of Cutting Surfaces ................72
STEP 6 : Set the Margin ..................................... 73
STEP 7 : Set the Surface leveling Process of the Scrap Board . 74
STEP 8 : Conrm the Cutting Preview .......................81
STEP 9 : Set the Surface leveling Process
of the Material .............................................83
STEP 10 : Set the Roughing Process .........................88
STEP 11 : Set the Finishing Process .........................93
STEP 12 : Set the Drilling Process ...........................97
STEP 13 : Set the Bottom Surface Process ..................103
Cutting (Double Sided) ........................105
STEP 1 : Attach the Material to the Scrap Board ............106
STEP 2 : Set the Origin Point ...............................108
STEP 3 : Perform the Surface Leveling of the Scrap Board ...112
STEP 4 : Perform the Surface Leveling of the Material .......115
STEP 5 : Perform the Roughing ............................116
STEP 6 : Perform the Finishing .............................118
STEP 7 : Perform the Drilling in the Material ................120
STEP 8 : Perform the Drilling in the Scrap Board ............122
STEP 9 : Reverse the Material ..............................123
STEP 10 : Cut the Bottom Surface ..........................126
STEP 11 : Remove the Cut Material ........................126
STEP 12 : Turning the Power O ...........................127