Dickey-John gac 2100 blue User Manual

OPERATOR’S MANUAL
GAC® 2100 Grain Analysis Computer (Blue, Gray, Agri Models)
11001-1688-201609
48 INSTRUMENT SETUP
Figure 38
Setting Date Format
CHANGE LABELS (6 KEY)
The Labels menu edits three label types:
– user name
– text strings (Blue model)
– factor names (Blue model)
Each of these labels attach to the grain moisture measurements in some
fashion. Editing of each label type is similar. The basic procedure is outlined
in the following five steps. Specific details and illustrations for each label
follow the basic outline.
• USER NAME – This heading appears on each measurement printout
(not the display) and can be the organization's name. The user name
can be two lines of up to 16 characters each.
• TEXT STRINGS – (Blue model) These are brief, commonly used
words or phrases added to the alpha screen for quick selection (e.g., a
name, company, etc.) when using alpha characters. After
programming, each phrase is selected in the same manner as
choosing a single character. Up to ten text strings can be preset. Each
string is identified on the alpha screen by an S number (S1 through
S10).
• FACTOR NAMES – (Blue model) These are entered as identifiers of
specific details for particular grains. When using factors with particular
grains, each factor name must be entered before the test can proceed.
DATE/TIME MENU
1: SET TIME
2: SET DATE
3: SET DATE FORMAT
SELECT ITEM NUMBER
(NEXT PAGE: STATUS)
SET DATE FORMAT
ENTER ACCESS CODE: __
SET DATE FORMAT
DATE FORMAT: MM/DD/YY
to CHANGE

Dickey-John gac 2100 blue Specifications

General

Brand	Dickey-John
Model	gac 2100 blue
Category	Measuring Instruments
Language	English