SM 110 PROGRAM MODE
42
3.8 Key Assignment
The Preset keys can be used for assignment of PLUs and Function keys to speed up the operation in R
mode.
3.8.1 PLU Assignment
PLU Number can be assigned to a preset key to call up PLU data by pressing the assigned preset key on
Registration Mode.
For example:
Assign PLU Number 100 to Preset Key Number 1.
DISPLAY
OPERATION
PT kg
＄/kg ＄
REMARK
[MODE][MODE]
[MODE]
S1
→
PLU FILE
Enter S mode.
Lamp S turns on.
[4] or [︾] three times
S4
→
KEY ASSIGNMENT
Key Assignment mode is MENU 4
in S mode.
[*] S4.0 PS AS 0 NO SET Enter PLU assignment mode.
[1][0][0] S4.0 PS AS 100 NO SET Enter PLU No.100
[PRESET 1] S4.0 PS AS 0 NO SET
PLU No.100 had been assigned to
Preset Key 1.
[◇][C]
S4
→
KEY ASSIGNMENT
Back to S mode.
Note1: Non-existing PLU No. can not be assigned.
Note2: If assigning PLU Number 50 to the Preset key No. 1 has been already programmed, the PLU No. 50 will
replace the old data of Preset Key No. 1, but PLU Number cannot replace the preset key are already assign for
Function Key, Vender Key or Preset Tare.
3.8.2 Function Key Assignment
By assigning the following function keys to Preset keys, the functions can be used by touching the assigned
keys
DISPLAY
OPERATION
PT kg
＄/kg ＄
REMARK
[MODE][MODE]
[MODE]
S1
→
PLU FILE
Enter S mode.
Lamp S turns on.
[4] or [︾] three times
S4
→
KEY ASSIGNMENT
Key Assignment mode is MENU 4
in S mode.
[*] S4.0 PS AS 0 NO SET Enter PLU assignment mode.
To Next Page
Loading...
Need help?
General
