Digi SM-110 User Manual

SM 110 PROGRAM MODE
80
3.22.2 Enable or Disable Scroll Sequence File
This Function is used to enable the programmed Scroll Message data by Scroll Sequence Number
shows on the Display in Registration Mode when scale in idle time. The Scroll Message, Scrolling
Pattern and Speed will follow Scroll Sequence Number setting.
Enable Scroll Sequence File
At Scroll Sequence programming Mode, enter Scroll Sequence Number you want (Ex. 1).
DISPLAY
OPERATION
PT kg
＄/kg ＄
REMARK
S14.0 SC SQ 0 NO SET
Enter Scrolling Sequence
programming mode.
[1] S14.0 SC SQ 1 NO SET
Enter Scrolling Sequence file
number.(Ex. 1)
[PLU] S14
→
SCROLL SEQUENC
Enable Scrolling Sequence
Number 1, back to S mode.
Note1: If you want to change the Scroll Sequence number, enter new sequence number follow by press [PLU] key.
Disable Scrolling Message
At Scroll Sequence programming Mode, enter Scroll Sequence Number you want (Ex. 0).
DISPLAY
OPERATION
PT kg
＄/kg ＄
REMARK
S14.0 SC SQ 0 NO SET
Enter Scrolling Sequence
programming mode.
[0] S14.1 SC SQ 0 NO SET
Enter Scrolling Sequence file
number.(Ex. 0)
[PLU] S14
→
SCROLL SEQUENC
disable Scrolling Sequence
Number 1, back to S mode.
All manuals and user guides at all-guides.com

Digi SM-110 Specifications

General

Brand	Digi
Model	SM-110
Category	Scales
Language	English