SM 110 PROGRAM MODE
52
3.14 Ingredient File
Ingredients data programmed in this Master Ingredient file can be printed on the Free Format (F1-F99)
with ingredient print area. The size of print area will decide the numbers of lines and characters of
every line. Maximum 15 lines can be programmed for each Master ingredient data and up to 16 Master
Ingredients data can be programmed in this file.
Note: Maximum 39 lines can be programmed for each Master Ingredient data when SPEC 43 set to 0.
3.14.1 Program Ingredient File
At Programming Mode, select Ingredient programming mode and then enter new Ingredient number
(Ex. 1) programming mode.
*For edit, enter existing Ingredient number.
DISPLAY
OPERATION
PT kg
＄/kg ＄
REMARK
[MODE][MODE]
[MODE]
S1
→
PLU FILE
Enter S mode.
Lamp S turns on.
[10] or [︾] nine times
S10
→
INGR FILE
Select Ingredient file
programming mode.
[*] S10.0 INGR 0 NO SET
Enter Ingredient File
programming mode.
[1][*] S10.1 G01.01 S1 A 100
Enter the Ingredient File
No.1.(Ex.No.1)
[S][U][G][A][R] S10.1 G01.06 SUGAR S1 A 100
Enter the Ingredient File as the
same procedures as Commodity
Name Entry.
(Ex. “SUGAR”)
[SIZE] S10.1 G01.06 SUGAR S2 A 95
Press [SIZE] key to change font
size of the Ingredient File.
[*] S10.1 G02.01 S1 A 100
Program 2
nd
line of this
Ingredient File.
[F][L][O][U][R] S10.1 G02.06 FLOUR S1 A95
[PLU] S10
→
INGR FILE
Store Ingredient File 1,back to S
mode.
To Next Page
Loading...
Need help?
General
