Digi SM-110 - Password Setting and Usage

SM 110 INITIAL SETUP
16
2.6 Password Setting
2.6.1 Procedures of Password Setting
DISPLAY
OPERATION
PT kg
＄/kg ＄
REMARK
Z1.0 RESET SALES DAILY Z mode. Lamp Z turns on.
[MODE] PWD X XXXX SET
Display password for X mode .
XXXX: former password
0: Not set
(1~4 bits are enable)Lamp X
flicker.
[1][2][3][4]
[*]
PWD X
PWD S
1234
XXXX
SET
SET
Set password for X mode as 1234.
Press [*] to save password for X
mode.
Lamp S flicker.
[*] PWD Z XXXX SET
Display password for Z mode.
Lamp Z flicker.
[3][3]
[C]
PWD Z
PWD Z
33
0
SET
SET
Clear the password for Z mode.
[*] PWD P XXXX SET
Display password for PWD mode.
Lamp R X S Z flicker.
[1][1][1][1] PWD P 1111 SET
Set password for PWD mode as
1111.
Lamp R X S Z flicker.
[*] 0.000 0.000 0.00 0.00
Return R mode after password
setting.
2.6.2 Password Using
{Hypothesis: PWD X: 1111; PWD S: No Set; PWD P: 1234}
DISPLAY
OPERATION
PT kg
＄/kg ＄
REMARK
0.000 0.000 0.00 0.00
Weight mode.
Lamp R turns on.
[MODE],[MODE]
(within 3 seconds)
ENTER PWD X
Need X mode password.
Lamp X turns on.
OPERATION DISPLAY REMARK
All manuals and user guides at all-guides.com
all-guides.com