SM 110 PROGRAM MODE
44
3.9 Shop Name File
Shop Name data will be printed on Label or Receipt can be programmed in this file. The maximum
number of characters possible to enter varies according to the size of print area or character size entry. Up
to 32 Shop Names can be programmed with each 3 lines as maximum and number of line is depends on
the Character Size entry.
The default Shop Name print on label can be set at SPEC 46 & print centering of shop name on label can
be select at SPEC 250 and default Shop Name print on Receipt can be set at SPEC47 & printing position
can be select at SPEC251.
3.9.1 Program Shop Name File
At Programming Mode, select Shop Name programming mode and then enter new Shop Name
number (Ex. 1) programming mode.
DISPLAY
OPERATION
PT kg
＄/kg ＄
REMARK
[MODE][MODE]
[MODE]
S1
→
PLU FILE
Enter S mode.
Lamp S turns on.
[5] or [︾] four times
S5
→
SHOP NAME FILE
Shop name File mode is MENU 5
in S mode.
[*] S5.0 SHOP 0 NO SET
Enter Shop Name File
programming mode.
[1][*] S5.1 S01.01 S1 A 100 Enter shop name code.(Ex.No.1)
[SIZE][D][I][G][I][SP
][S][H][O][P]
S5.1 S01.10 SHOP S2 A 76
Press [SIZE] key to change font
size of the shop name.
Enter the shop name .(Ex. “DIGI
SHOP”)
[*] S5.1 S02.01 S1 A 100
Program 2
nd
line of this shop
name.
[T][E][L][:]…… S5.1 S02.13 S1 A 88
Enter shop name for the 2
nd
line.(Ex. “TEL:57234888”)
[PLU] S5
→
SHOP NAME FILE
Store Shop Name File 1,Back to S
mode.
To Next Page
Loading...
Need help?
General
