Digi SM-110 - Page 73

SM 110 PROGRAM MODE
68
Following is the example on how to customize standard format T8 to your needs. E.g. Add an
ingredient text and remove the PLU # from the standard Item Label Format
DISPLAY
OPERATION
PT kg
＄/kg ＄
REMARK
S12
→
FREE FORMAT
At Free Format program mode
[*] S12.0 FREE 0 1-99
Enter Free Format setting
programming mode.
Select Free Format File Number.
[8] S12.0 FREE 8 1-99
Enter the Free Format File
No.1.(Ex.No.8)
[X] S12.0 FREE
NO
0
COPY
Press [X] key to enter free format
copy function.
[8] or
[<<] and [>>]
S12.0 FREE T8 8 COPY
Press [8] or [<<] and [>>] to
select the existing label format
you want to be copy.(Ex. T8)
[*] S12.1 LABEL 56 WT MM
Change label width (Ex. No
change).
[*] S12.2 LABEL 55 HT MM
Change label height (Ex. No
change).
[*] S12.3 LABEL 0 DG ANGLE
Change print angle.( Ex. No
change)
[*] S12.4 LABEL ITEM LABEL Select Item Label.
[*] S12.5 PLUno
← 1
F ITEM
Enter item setting.
[*][*][*][*] S12.5 PLUno 7 STATUS
Enter PLU Number print Status
mode.
[C]or[0] S12.5 PLUno 0 STATUS Change the status to NO PRINT
[*][*] S12.5 PLUno
← 1
F ITEM
Save the setting and go to next
selection.
[8] S12.5 COMM
← 8
F ITEM
Select Commodity Name
program mode.
[*][*][3][2] S12.5 COMM 23 Y MM
Enter Y position setting mode
and change it from 23 mm to 32
mm and go to next selection.
[*] S12.5 COMM 0 DG ANGLE
Change print angle.( Ex. No
change)
All manuals and user guides at all-guides.com