DigiDesign C24 User Manual

Chapter 6: C|24 Pro Tools Controls 51
Grabber Selects the Grabber tool and cycles
through the versions of the tool.
Pencil Selects the Pencil tool and cycles through
the versions of the tool.
Smart Selects the Smart Tool.
The Smart Tool can also be selected by simulta-
neously pressing any combination of the Trim,
Select, and Grabber switches.
Link Edit and Timeline
The Link Edit and Timeline switch toggles the
Link Timeline and Edit Selection option. The
switch lights when the option is selected.
Link Track and Edit Selection
The Link Track and Edit Selection switch toggles
the Link Track and Edit Selection option. The
switch lights when the option is selected.
MIDI Commands and Controls
All Notes Off Executes the All MIDI Notes Off
command.
Wait For Note Enables Wait for Note in the
Transport window. The switch lights when Wait
for Note is enabled.
Click Enables the Metronome Click in the Trans-
port window. The switch lights when Metro-
nome Click is enabled.
Count Off Enables the Countoff in the Transport
window. The switch lights when Countoff is en-
abled.
Merge-Record Enables MIDI Merge recording in
the Transport window. The switch lights when
MIDI Merge is enabled.
Tab to Transients
The Tab to Transients switch toggles the Tab to
Transients option. The switch lights when the
option is selected.
Zoom Toggle
The Zoom Toggle switch controls the Zoom Tog-
gle state. The switch lights when Zoom Toggle is
enabled.
Window Switches
Alternate Function Switch
The Alternate Function switch selects the top or
bottom command for the dual-function
switches in this section.
 When the Alternate Function switch is off, the
top function is active for all switches in this sec-
tion.
 When the Alternate Function switch is on, the
bottom function is active for all switches in this
section.
Pro Tools Windows
Mix Opens the Mix Window or brings it to the
front.
Edit Opens the Edit Window or brings it to the
front.
Window switches
Mix/
Workspace
Edit/
Tas k M gr
Plug-in/
Big Counter
Pan/
Automation
Trans po r t /
Undo
Win Config/
Properties
Mem Loc/
MIDI Ops
Alt Function

DigiDesign C24 Specifications

General

Type	Control Surface
Channels	24
Compatibility	Pro Tools
Faders	24 motorized
Inputs	8 analog line inputs
Outputs	8 analog line outputs
Aux Sends	N/A (Control surface only)
Connectivity	Ethernet, MIDI
Display	LCD scribble strips
Power Supply	External power supply