DigiDesign Mbox User Manual

Getting Started with Mbox72
3 From the System Settings Default Input pop-
up menu, select Digidesign HW.
4 From the System Settings Default Output pop-
up menu, select Digidesign HW.
Leave System Output and Selected Audio
Device set to Built-in audio controller. The
Digidesign CoreAudio Driver cannot be
used for system sounds.

DigiDesign Mbox Specifications

General

Type	Audio Interface
Mic Preamps	2
Phantom Power	Yes
Bit Depth	24-bit
Software Included	Pro Tools LE
Connectivity	USB
Simultaneous I/O	2 x 2
Analog Inputs	2 x XLR/TRS combo
Analog Outputs	2 (1/4" TRS)
Headphone Output	1 x 1/4" TRS
Sample Rate	48 kHz