Digital Projection Titan Super Quad Series User Manual

Digital Projection Titan Quad / 930 / 800 Series COMMAND GUIDE Remote Communications Guide
95
Rev H October 2013
Command Guide
<command> <operator> <values>
Input Selection menu
input = ?
0 = CVBS 1
1 = CVBS 2
2 = S-Video
3 = Component
4 = VGA
5 = 3G-SDI
6 = DVI
7 = HDMI
8 = Test Pattern
9 = Main/DVI (3D models only)
10 = Sub/HDMI (3D models only)
11 = Dual Pipe (3D models only)
Test Pattern menu
test.pattern = ?
0 = Grey V Bars
1 = Grey H Bars
2 = Aspect Test
3 = Alignment Grid
4 = Warp Adjust
5 = SMPTE
6 = Checkerboard
7 = White Field
8 = Black Field
9 = Screen Layout
Lens menu
zoom.in
(execute)
zoom.out
(execute)
focus.near
(execute)
focus.far
(execute)
calibrate.zoom
(execute)
calibrate.focus
(execute)
lens.centre
(execute)
Notes
The test.pattern command
is only accessible if the
input
command is set to 8 (Test Pattern):
*input = 8
.

Digital Projection Titan Super Quad Series Specifications

General

Brand	Digital Projection
Model	Titan Super Quad Series
Category	Projector
Language	English