Digital Projection Titan Super Quad Series User Manual

Digital Projection Titan Quad / 930 / 800 Series COMMAND GUIDE Remote Communications Guide
102
Rev H October 2013
<command> <operator> <values>
Lamps menu
lamp.mode = ?
Dual lamp projectors:
0 = both lamps
1 = lamp 1
2 = lamp 2
3 = auto 1
Quad lamp projectors:
0 = all lamps
1 = auto 3
2 = auto 2
3 = auto 1
4 = lamps 1,2 and 3
5 = lamps 1,2 and 4
6 = lamps 1,3 and 4
7 = lamps 2,3 and 4
8 = lamps 1 and 2
9 = lamps 1 and 3
10 = lamps 1 and 4
11 = lamps 2 and 3
12 = lamps 2 and 4
13 = lamps 3 and 4
14 = lamp 1
15 = lamp 2
16 = lamp 3
17 = lamp 4
lamp.power = ?
1 to 100 (integer)
lamp1.hours
lamp2.hours
lamp3.hours
lamp4.hours
?
lamp1.strikes
lamp2.strikes
lamp3.strikes
lamp4.strikes
?
Notes
The lamp.power command has
an active value range between
80 and 100. Any value lower than
80 will be interpreted as 80 by the
projector.
The lampX.hours commands
return the lamp hours in HH:MM
format.

Digital Projection Titan Super Quad Series Specifications

General

Brand	Digital Projection
Model	Titan Super Quad Series
Category	Projector
Language	English