Setup menu
• Orientation
Depending on how the projector is mounted, select the appropriate setting from the drop-down
list.
• Latency
Affects interlaced sources only. For fastest response, the Lowest setting gives minimum frame
delay. For improved performance with lms involving motion sequences, the Best Video setting
uses adaptive de-interlacing and interpolation, but takes longer to process.
Reset Default Settings
When you press OK to restore the factory default settings, a warning message appears, asking you to conrm or cancel.
Once the process has begun, wait one minute and then power cycle the projector so the restored settings can take effect.
Notes
Main Menu
Setup
Do NOT do this unless you are
sure that you want to restore ALL
the current settings to their factory
defaults.
To Next Page
Loading...
Need help?
General
