Digital Projection Titan Super Quad Series User Manual

Digital Projection Titan Quad / 930 / 800 Series COMMAND GUIDE Remote Communications Guide
104
Rev H October 2013
<command> <operator> <values>
Information menu
sw.version ?
board.id ?
fw.version ?
from.version ?
lens.version ?
board.id3d ?
fw.version3d ?
seq.version ?
Miscellaneous commands
model.name ?
serial ?
lamp1.serial
lamp2.serial
lamp3.serial
lamp4.serial
?
Notes
sw.version returns the software
release version - identical to the
Interface eld in the Information >
Conguration menu.
board.id is identical to the
Hardware eld in the Information
>Conguration menu.
fw.version returns the rmware
version.
from.version returns the
factory ROM version.
lens.version returns the lens
mount version - identical to the
Lens eld in the Information >
Conguration menu.
board.id3d and
fw.version3d work with 3D
projectors only.
board.id3d is identical to
the
3D Hardware eld in the
Information>Conguration
menu.
fw.version3d is identical
to the
Firmware 3D eld in the
Information>Conguration
menu.
seq.version returns the
formatter sequences version -
identical to the Sequences eld in
the Information>Conguration
menu.

Digital Projection Titan Super Quad Series Specifications

General

Brand	Digital Projection
Model	Titan Super Quad Series
Category	Projector
Language	English