Segmentation
Segmentation can be used if the same image is fed into each projector.
• If Segmentation is Off, every projector in the array will display the whole image.
• If this setting is On, each projector will display its own segment only.
Set to Off if you have external software that handles segmentation.
Notes
Main Menu
Edge Blend
This menu is available only when
Setup > System > Conguration is
set to Edge Blend.
None of the other items in this menu
are available until either the Array
Width or the Array Height setting
is greater than 1.
For a detailed step-by-step
description of the edge blend
process, see Blending images
from multiple projectors further in
this section.
To Next Page
Loading...
Need help?
General
