Some 3D settings explained (continued)
Frame Rate Multiplier
If the 3D video is available only at low frame rates, it will be
necessary to multiply the frame rate to obtain a icker-free
image. For example, a 60Hz frame rate can be doubled to
120Hz, or a 48Hz frame rate could be tripled to 144Hz.
Notes
The information on this page does
not apply to 2D projectors.
L1
R1
L2 R2
L1
L1
R1 R2L2 L3R2
R1 L3
L2
IN
OUT
x2 example