DIGIVISION DVR - Page 47

DVR Server Manual
47
Medium 18 18 23 600000
Low 21 21 26 450000
Lowest 24 24 29 300000
For DCIF:
Max bps = (Maxbps/3)*5 Note: Maxbps is the CIF’s value with the same
configuration (I P B)
For D1:
Max bps = (Maxbps/3)*8 Note: Maxbps is the CIF’s value with the same
configuration (I P B)
【Alarm Adjust fps】Select enable or disable, If select ”enable”, when
alarm occurred, the camera will record with real-time frame rate(25fps or
30fps) ,even though
【Frame Rate(fps)】 has been set other values(eg:5fps).
【Remote Quality】Set the image quality of the clients to be recorded
from Poorest, Poor, Medium, Very good and Best.
Click this button, users can make advanced setup for video quality of
client end, also can setup I B P frame and adjust maximum bit rate according
to the network bandwidth.
【Image Size】Set the resolution for local record. There is an item
“704*576(12fps)”, each channel can be set “704*576”, but not real time,
system will select frame rate automatically around to 12-15fps。To get best
effect, you should set the resolution of local record according to your CPU
configuration. There is a referenced configuration sample as below:
Computer configuration:
CPU: Intel Pentium 4 2.4GHz
Motherboard: ECS 848P-A
Graphic Card: ATI 9550 128MB,
Memory: 512MB
HDD: 120G (IDE)
Recommended resolution configuration for different channels:
DVR Board Channels
Recommended
Resolution
Remark
64 CIF
Continuous recording
is not recommended
48 CIF
40
DCIF
CIF
32
DCIF
CIF
24 DCIF