DVR Server Manual
In this screen, you can define the PTZ protocol and set the Preset Position
as well as the plan to execute them automatically.
【Camera】Select the camera to be set from the drop- list.
【Baud rate】Set baud rate according to PTZ protocol from the drop- list.
【PTZ Protocol】Select the communication protocol for the PTZ camera
from drop-list.
【Copy to】After finishing one channel, if you want to set any other
channels’ configuration as the same as this camera, you can select channel
number from drop-list, and press
button.
【PTZ Address】Set the address of the decoder, which must be matched
with the value of dipswitch in the PTZ.
【Speed】Set the speed of the PTZ.
【Preset position & schedule setup】Define preset position and set time
to call preset position automatically. System can add and delete plan time.
To Next Page
Loading...