dji INSPIRE 3 - Page 109

DJI Inspire 3 User Manual
©
2023 DJI All Rights Reserved.
109
1
2
3
4
Spotlight Pro Usage
1. Enabling Spotlight Pro:
tap to enable or disable Spotlight Pro.
2. Selecting the Target:
a. Drag-Select Target: after enabling Spotlight Pro, tap and drag on the screen to select a
target. If the target is too small or not identied, drag-select target may fail.
b. Tap-Select Target: after enabling the Target Scanning in the Flight Control Settings, the
target will be identied and displayed in the app, tap to track the target.
3. Tracking the Target:
after selecting the target, tap the Track button next to the target
frame or press the C2 button on the remote controller to start tracking the target.
4. Tap to reselect the target.
• When the target is blocked or beyond the screen, the app will predict the target
position and track the position.