dji INSPIRE 3 - Full Screen Mode; Map View

DJI Inspire 3 User Manual
©
2023 DJI All Rights Reserved.
111
1. GEO Zone Map Layers: tap to view all GEO Zone layers and enable or disable the GEO Zones
layer display on the map.
2. Recenter View: tap to center the remote controller location in the view.
3. Map Lock: when enabled, the map cannot be rotated. When disabled, the map can be
rotated freely.
4. Map Layer Selection: tap to select a satellite or street map (standard mode) according to
operational requirements.
5. Clear Flight Trajectory: tap to clear the ight trajectory of the aircraft.
1
2
3
4
5
Full Screen Mode
In the gimbal camera view or the FPV camera view, slide two fingers down on the screen to
enter or exit the Full Screen mode.
Map View