dji INSPIRE 3 - Intelligent Landing Gear

DJI Inspire 3 User Manual
©
2023 DJI All Rights Reserved.
27
1. Intelligent Landing Gear Switch: when enabled, the aircraft will automatically raise or lower
the landing gear during takeo or landing. When disabled, it is recommended to go to the
camera view and tap > > Land Gear Settings to enable Precision Landing so that
downward obstacle avoidance is turned on. Once the landing gear is raised during landing,
the aircraft will automatically brake at 1 m above the ground to protect the gimbal camera.
2. Landing Gear Transformation Buttons: during ight, tap the buttons to raise or lower the
landing gear.
• The landing gear can also raise or lower by pressing the R1 button on the remote
controller. Read the Gimbal Camera View Introduction in the DJI Pilot 2 App chapter for
more details.
• The landing gear will be automatically locked when the aircraft stays on the ground,
unlock it in the Landing Gear Settings in app before using the remote controller or app
to operate the landing gear, if necessary.
1
2
Intelligent Landing Gear
Go to the DJI Pilot 2 camera view and tap to display the intelligent landing gear switch.