dji INSPIRE 3 - Low Battery RTH

DJI Inspire 3 User Manual
©
2023 DJI All Rights Reserved.
31
Low Battery RTH
When the Intelligent Battery level is too low and there is not enough power to return home,
land the aircraft as soon as possible.
To avoid unnecessary danger caused by insufficient power, the aircraft will automatically
calculate if it has enough power to y to the Home Point from its current location. A warning
prompt will appear in DJI Pilot 2 when the battery level is low and only has enough power to
complete an RTH ight.
The aircraft will automatically fly to the Home Point if no action is taken after a 10-second
countdown. Cancel RTH by pressing the RTH button or the ight pause button on the remote
controller.
If the countdown of the low battery RTH is canceled, after 60 seconds from the last countdown,
once the current battery level becomes lower than the Smart RTH battery level, the app will
display a countdown for 10 seconds. If RTH is canceled following the warning, the Intelligent
Battery may not have enough power for the aircraft to land safely, which may lead to the
aircraft crashing or being lost.
The aircraft will land automatically if the current battery level can only support the aircraft long
enough to descend from its current altitude. Auto landing cannot be canceled, but the remote
controller can be used to alter the horizontal movement and the speed of descent of the aircraft
during landing. If there is sucient power, the throttle stick can be used to make the aircraft
ascend at a speed of 1 m/s.
During auto landing, move the aircraft horizontally to nd an appropriate place to land as soon
as possible. The aircraft will fall if the user keeps pushing the throttle stick upward until the
power is depleted.
Battery Level Indicator
Power required to
return home
Critical Low battery
level warning
Low battery
level warning
Auto landing
Sufficient battery
level
Remaining flight time
12:29
Battery Level
Warning
Implication Flight
Low Battery RTH
The remaining battery
level is only enough for
the aircraft to y to the
Home Point safely.
If RTH is selected, the aircraft will y to
the Home Point automatically and landing
protection will be enabled. Users can regain
control of the aircraft and land it manually
during RTH.
The warning will not appear again
after choosing not to use RTH. Decide
carefully and ensure ight safety.