dji INSPIRE 3 - Trolley Case Lock

DJI Inspire 3 User Manual
©
2023 DJI All Rights Reserved.
135
Trolley Case Lock
Setting the Combination Code
The combination code is original 000. Follow the steps below to reset the combination code:
1. Toggle the resettable switch on the rear of the lock to SET.
2. Adjust the dials to the set a personal combination code.
3. Toggle the resettable switch to OFF to nish setting.
4. Make sure to memorize the new combination code well.
Using the Combination Code
1. Adjust the dials to the correct numbers and press the button to open the lock.
2. Press down the lock and adjust the dials to the numbers randomly to lock the trolley case.
2
1. Resettable Switch
2. Dials
3. Button
3
If the lock cylinder is opened, use a tool to turn it to the red dot position
by the direction of the arrow to lock it again.
Any tool that can be inserted in the lock cylinder is OK.
1