dji INSPIRE 3 - Remote Controller Status Indicators

DJI Inspire 3 User Manual
©
2023 DJI All Rights Reserved.
73
Remote Controller LEDs and Alert
Remote Controller LEDs
1
2
1. Status LEDs
The status LED indicates the status of the remote controller, the aircraft, and the link
between them.
Blinking Patterns Descriptions
Solid red Disconnected with aircraft
Blinking red Low aircraft battery level
Solid green Connected with aircraft
Blinking blue The remote controller is linking to an aircraft
Solid yellow Firmware update failed
Blinking yellow Low remote controller battery level
Blinking cyan Control sticks not centered
2. Battery Level LEDs
The battery level LEDs indicate the battery level of the remote controller.
Battery Level LEDs Battery Level
88%~100%
75%~87%
63%~74%
50%~62%
38%~49%
25%~37%
13%~24%
0%~12%
Remote Controller Alert
The remote controller vibrates or beeps twice to indicate an error or warning. For detailed
information, see the real-time prompts on the touchscreen or in DJI Pilot 2. Swipe down from the
top of the screen to open Shortcut Settings and turn on Mute mode to disable all voice alerts.
Any voice prompts and alerts will be disabled in Mute mode, including alerts during RTH and
low battery alerts for the remote controller or aircraft. Use with caution.