dji INSPIRE 3 - Pre-Flight Safety Checklist

DJI Inspire 3 User Manual
120
©
2023 DJI All Rights Reserved.
Pre-Flight Checklist
1. Only use genuine parts that are in good condition. DO NOT modify or alter the aircraft,
its components, or parts. Make sure that when installing any external devices that the
total weight of the aircraft does not exceed the maximum takeo weight. In addition, the
external device must be installed in a location so that the center of gravity is maintained
within the range of the aircraft top shell to keep the aircraft stable and that the vision
systems, the infrared sensing systems, and the auxiliary lights are not blocked.
2. Make sure all devices, such as remote controller and intelligent batteries, are fully charged.
3. Ensure there are no foreign objects such as water, oil, soil, or sand inside of the aircraft
or its components. The air vents of the aircraft, the cooling holes of the camera, and the
ventilation holes of the motor are not blocked.
4. Make sure the propellers are securely mounted and not damaged or deformed. DO NOT
use chipped or broken propellers.
5. Make sure the aircraft motors are clean and in good condition. Rotate the propeller to
examine the motor and make sure the motor can rotate smoothly without abnormal sound.
Otherwise, stop using the aircraft immediately and contact DJI Support.
6. Make sure the camera lens is clean and in good condition and the gimbal can rotate
unobstructed.
7. Make sure the lenses of the vision systems, gimbal camera, FPV camera, the glass of the
infrared sensors, and the auxiliary lights are clean and not blocked in any way.
8. Make sure the covers of ports have been closed rmly.
9. Make sure the ight area is outside any GEO zones, and ight conditions are suitable for
ying the aircraft.
10. Place the aircraft on open and at ground. Make sure there are no obstacles, buildings, or
trees nearby and that the aircraft is 5 m away from the pilot. The pilot should be facing the
rear of the aircraft.
11. Make sure that the ESC is beeping after powering on the aircraft.
12. Make sure DJI Pilot 2 is properly running to assist with the ight. Without the ight data
recorded by the DJI Pilot 2 app in certain situations (including the loss of your aircraft), DJI
may not be able to provide aftersales support to you or assume liability.
13. Make sure DJI Pilot 2 and the aircraft rmware have been updated to the latest version.
14. If required before a ight, follow the prompts in the app to x any abnormalities with the
ESCs.
15. Make sure that the DJI Pilot 2 app displays at least 6 satellites.
16. Check if the Remote ID is up to date and working.