dji INSPIRE 3 - Page 18

DJI Inspire 3 User Manual
18
©
2023 DJI All Rights Reserved.
16. C3 Button
Customize functions in DJI Pilot 2.
17. Left Dial
Controls the tilt of the gimbal.
18. Record Button
Press once to start or stop recording.
19. Flight Mode Switch
Switch between dierent ight modes. Users can switch between the Normal, Sport, and
Function modes. The Function mode can be congured in the app.
20. Internal RC Antennas
Transmit aircraft control and video wireless signals. DO NOT block the internal RC antennas
during usage. Otherwise, the signal may be aected.
21. microSD Card Slot
For inserting a microSD card.
22. USB-A Port
Users can connect the remote controller to the TB51 intelligent battery charging hub to
update the charging hub rmware. Users can also insert third-party devices, such as a USB
ash drive or a memory card.
23. HDMI Port
For outputting HDMI signals to external monitor.
24. USB-C Port
For charging the remote controller by connecting to the charging hub.
25. Focus/Shutter Button
Press the button halfway down for autofocus, and all the way down to take a photo.
26. Right Dial
Controls the pan of the gimbal.
27. Scroll Wheel
After pressing the designated side button on the screen, turn the scroll wheel to adjust the
camera parameters. Read the Camera Operation section of the Gimbal Camera for more
information. It can be set in DJI Pilot 2.
16
17
18
19
25
26
27
28
3 0
29
21
22
23
24
31 31
2 0 2 0