62
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
B. Duration for fully charging a WB37 battery with 0% power:
a. When mounted on the remote controller and the internal battery level is 0%, it takes
approximately 2 hours while fully charging the internal battery.
b. When mounted on the remote controller and the internal battery level is 100%, it takes
approximately 1 hour and 10 minutes.
c. When inserted into the BS30 battery station, it takes approximately 1 hour and 20 minutes.
The charging time may vary with the ambient temperature.
Charging Mechanism
a. When the remote controller is connected with both a charging device and an external battery, the
remote controller will be powered by the charging device.
b. When the external battery is mounted and the remote controller is not connected with a charging
device, the remote controller will be powered by the external battery. When the external battery is
depleted, the remote controller will be powered by the internal battery.
Checking the Battery Level
Checking the Internal Battery Level
Press the power button once to check the current battery level.
Low High
Checking the External Battery Level
Press the power button on the external battery, and the LEDs will indicate the current battery level of the
external battery.
High
Low
Alternatively, go to the home screen of the remote controller and check the battery levels of
both the internal and external batteries on the status bar.
To Next Page
Loading...
Need help?
General
