dji M30 T User Manual

23
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
Flight Restrictions and Unlocking
GEO (Geospatial Environment Online) System
DJI’s Geospatial Environment Online (GEO) system is a global information system that provides real-time
information on ight safety and restriction updates and prevents UAVs from ying in restricted airspace.
Under exceptional circumstances, restricted areas can be unlocked to allow ights in. Prior to that, the
user must submit an unlocking request based on the current restriction level in the intended ight area.
The GEO system may not fully comply with local laws and regulations. Users shall be responsible for
their own ight safety and must consult with the local authorities on the relevant legal and regulatory
requirements before requesting to unlock a ight in a restricted area.
GEO Zones
DJI’s GEO system designates safe ight locations, provides risk levels and safety notices for individual
ights, and oers information on restricted airspace. All restricted ight areas are referred to as GEO
Zones, which are further divided into Restricted Zones, Authorization Zones, Warning Zones, Enhanced
Warning Zones, and Altitude Zones. Users can view such information in real time in DJI Pilot 2. GEO
Zones are specic ight areas, including but not limited to airports, large event venues, locations where
public emergencies have occurred (such as forest res), nuclear power plants, prisons, government
properties, and military facilities. By default, the GEO system limits takeos and ights in zones that may
cause safety or security concerns. A GEO Zone map that contains comprehensive information on GEO
Zones around the globe is available on the ocial DJI website: https://www.dji.com/ysafe/geo-map.
Flight Restrictions in GEO Zones
The following section describes in detail the ight restrictions for the abovementioned GEO Zones.
GEO Zone Flight Restriction Scenario
Restricted
Zones (Red)
UAVs are prohibited from flying
in Restricted Zones. If you have
obtained permission to fly in a
Restricted Zone, please visit https://
www.dji.com/flysafe or contact
ysafe@dji.com to unlock the zone.
Takeoff: The aircraft motors cannot be started in
Restricted Zones.
In Flight: When the aircraft ies inside a Restricted
Zone, a 100-second countdown will commence
in DJI Pilot 2. When the countdown is finished,
the aircraft will land immediately in semi-automatic
descent mode and turn o its motors after landing.
In Flight: When the aircraft approaches the boundary
of a Restricted Zone, the aircraft will automatically
decelerate and hover.

dji M30 T Specifications

General

Brand	dji
Model	M30 T
Category	Drones
Language	English