DMC Sigma2N - Page 106

Simga2N Traction Advanced Manual– V1.3 Page 106 (166) ©2021 DMC GmbH Herten Germany
Resume of Battery Current Limit adopted in each situation
BCL Via CAN or
Via BMS
Static standard BCL
(M5.4-1 and M5.4-2)
Static ADV mode 1 BCL
(M5.4-3 and M5.4-4)
Static ADV mode 2 BCL
(M5.4-5 and M5.4-6)
BCL Via CAN not enabled
ADV mode not enabled

BCL Via CAN not enabled
ADV mode enabled
No ADV drive style active

BCL Via CAN not enabled
ADV mode enabled
ADV drive style 1 active

BCL Via CAN not enabled
ADV mode enabled
No ADV drive style 2 active

BCL Via CAN enabled
BCL Via CAN not timed out
ADV mode not enabled

BCL Via CAN enabled
BCL Via CAN timed out
ADV mode not enabled

BCL Via CAN enabled
BCL Via CAN not timed out
ADV mode enabled
No ADV drive style active

BCL Via CAN enabled
BCL Via CAN timed out
ADV mode enabled
No ADV drive style active

BCL Via CAN enabled
BCL Via CAN not timed out
ADV mode enabled
ADV drive style 1 active

(If lower)

(if lower)
BCL Via CAN enabled
BCL Via CAN timed out
ADV mode enabled
ADV drive style 1 active

BCL Via CAN enabled
BCL Via CAN not timed out
ADV mode enabled
ADV drive style 1 active

(If lower)

(if lower)
BCL Via CAN enabled
BCL Via CAN timed out
ADV mode enabled
ADV drive style 1 active
