DMC Sigma2N - Available Application Notes and Manuals

Simga2N Traction Advanced Manual– V1.3 Page 161 (166) ©2021 DMC GmbH Herten Germany
11 Available Application Notes and Manuals
The following application notes/ manuals are available upon request.
AN
Title
Version
160208
Simga2NAN 160208 - Flash Programmer Demo Description V1
V1.0
--
DMC PC Interface Manual V16
V1.6
130102
Sigma2 AN 130102 - I2t Setup V1.0
V1.0
--
CAN Messages in DMC protocol V2.11
V2.11
160105
Simga2NAN 160105 - Can DMC Protocol V2.0
V2.0
--
Can Messages in CAN Open Compatible Protocol V1.4
V1.4
180618
Simga2NAN 180618 - CAN Open Compatible protocol V2.12
V2.12
200228
Simga2NAN 200228 - Dual motor functionalities V1.0
V1.0
190702
DMC Display AN 190702 – Colour Display V1.3
V1.3
--
Simga2NAC Manual V1.0
V1.0
--
Simga2NIPM Manual V1.0
V1.0
--
Simga2NPMS Manual V1.0
V1.0
Simga2NSetup for driving 6-phase motors V1.5
V1.5
Simga2NSetup for Dual Motor on different axles without steerpot V1.0
V1.0
Simga2NSetup for Dual Motor on same axle without steerpot V1.0
V1.0
201021
Simga2NAN 201021 - CAN Open Compatible BMS support V1.0
V1.0