Simga2N Traction Advanced Manual– V1.3 Page 158 (166) ©2021 DMC GmbH Herten Germany
10 DMC Displays
10.1 DMC Colour Display
Developed as a the new generation for the DMC Display, the DMC Lite Display maintains the flexibility of its predecessor,
introducing a brand new graphical design.
The DMC Lite Display still operates on the CAN bus and has the capability of showing the information of up to 6 DMC
Sigms2N Controllers at the same time.
The DMC Lite Display features 5 different pages to display all the available information:
1) The Main page displays Drive and BDI information of the “Display Master Controller” and, if any, the active
faults of every DMC Controller in the Network configured to send messages to the DMC Display.
2) The Second Page shows a detailed status of each DMC Sigms2N Controller configured to send messages to the
DMC Display.
3) The Third page shows the drive and key hour counters, plus a configurable vehicle number to uniquely identify
the machine.
4) The Fourth page shows a fault logger, gathering the fault of every DMC Sigms2N Controller.
5) The Fifth page displays information about Display SW and HW.
In addition to this, a setup menu is present and can be accessed from every page by pressing the central button.
For more information about the DMC Colour Display please refer to the dedicated Application Note ([2]).
To Next Page
Loading...
