Simga2N Traction Advanced Manual– V1.3 Page 25 (166) ©2021 DMC GmbH Herten Germany
3.1.3 Wiring of analog inputs
The Simga2NController has several wiring options for the three analog inputs available. The wiring to be adopted
depends on the desired wire-off detection capability.
The wire-off detection is available on both “Pin A8 Analogue supply 5V” and “Pin A10 Analogue supply 0V”. Depending
on the chosen wiring, different wire-off detection configurations are possible.
The “Pin A8 Analogue supply 5V” has maximum current capability of 10mA.
The “Pin A19 Supply 12V -- 70mA max.” has a maximum current capability of 70mA.
To Next Page
Loading...
