DMC Sigma2N - Menu 1.16 Vehicle Menu

Simga2N Traction Advanced Manual– V1.3 Page 83 (166) ©2021 DMC GmbH Herten Germany
Menu 1.16 “Vehicle menu”
Cal.
Ref.
Parameter name “Calibrator text”
Range
Step
size
Default
Index
Sub-index
1
Motor2Vehicle speed ratio ”SpdRatio”
1.0 – 999.9
0.1
120.0
0x200F
0x1
2
Vehicle maximum speed ”VmaxSpd”
0.0Kph – 999.9Kph
0.1 Kph
20.0 Kph
0x200F
0x2
M1.16-1 Motor2Vehicle speed ratio ”SpdRatio”
This set the ratio between the motor speed in RPM. and the vehicle speed in km per hour (KPH) or miles per
hour (MPH).
For example if the actual motor speed is 3000 RPM and ”SpdRatio” is set to 100, the Vehicle Speed value that
can be seen in the status menu or in the DMC display is 30.0 Kph (or 30.0 Mph).
M1.16-2 Vehicle maximum speed ”VmaxSpd”
This set the full scale indication on the Sigmagauge LCD or Display bargraph speed indicator.
Setting the parameter to 0kph means that there will be no indication of speed shown on the Sigmagauge LCD.