Simga2N Traction Advanced Manual– V1.3 Page 157 (166) ©2021 DMC GmbH Herten Germany
9 Software updates
DMC reserves the right to issue Software Updates without prior notice.
Software Updates are intended to introduce new functionalities, update existing ones or fix bugs in the application or
motor module.
In case an update has to be performed on a DMC Simga2NController, a “DMC Flash Cable” is needed (part number
980/SS2). This cable acts as a USB interface dongle and has to be plugged into “Connector B - Communications - 8 Way”
before switching on the DMC Simga2NController.
For a more detailed description about the procedure used to update the software of a DMC Simga2NController please
refer to Errore. L'origine riferimento non è stata trovata..
To Next Page
Loading...
