DMC Sigma2N - Page 2

Simga2N Traction Advanced Manual– V1.3 Page 2 (166) ©2021 DMC GmbH Herten Germany
Modification History:
Revision
Issue Date
Author
Changes
1.0
09/12/2021
SM&FM
First development
1.1
13/04/2022
SM
Introduce generator parameters and align names. Update error codes.
1.2
18/10/2022
SM
Introduce parameter for DO chopping frequency. Error codes for thermal
sensor wireoff. Status menu including DS301 and DS402 statuses. Added
power wirings with external line contactor. Fill Battery current limits menu
table. Add option for BMS allow drive while charging. Add option for having
speed limit on steerpot to act with its own ramp.
1.3
06/02/2023
SM
Fix F29 error code description related to Shared LC