13
Installation
XR2400F Installation
Guide
2500 N. Partnership Boulevard Springfield, MO 65803 www.dmpnet.com Digital Monitoring Products
Fire Command Center
11.1 Description
The XR2400F provides an LCD display and 20-key keyboard for programming and user operation of the system.
The Fire Command Center is installed on a mounting plate for easy access through the enclosure door. To the
left of the keyboard, a keyswitch has been installed and pre-wired. The user must turn the keyswitch to enable
the four function keys. See the illustration below.
11.2 Connection
The display and keyboard are factory pre-wired to terminals 7, 8, 9, and 10 of the XR2400F panel. For standby
battery calculations, the display draws 100mA of current in normal standby or alarm condition. See Panel
Standby Battery Calculations. The keyswitch has been pre-wired to the membrane keyboard.
11.3 Remote Fire Command Center
Up to seven Model 630F Remote Fire Command Centers may be remotely attached to the XR2400F system.
See 630F Installation Guide, LT-0562, for complete information.
Figure 10: Fire Command Center keyboard and
display
To Next Page
Loading...
