TEST ACTION APPLICABILITY
12 Turn the ignition off.
Disconnect the Window Motor connector.
Remove the Passenger Down Relay
Measure the resistance of thePassenger WindowDown Relay Output circuit between
the Relay connector and the Window Motor connector.
Is the resistance below 5.0 ohms?
All
Yes → Replace the Passenger Window Down Relay.
Perform BODY VERIFICATION TEST - VER 1.
No → Repair the Passenger Window Down Relay Output wire for an
open.
Perform BODY VERIFICATION TEST - VER 1.
356
POWER WINDOWS
PASSENGER WINDOW HALL EFFECT FAILURE — Continued
To Next Page
Loading...
