Dodge ZB 2005 - Page 232

INSTRUMENT PANEL SPEAKER
(1) Connect wire harness connector and position
speaker.
(2) Install mounting fasteners. Tighten to 2 N·m
(19 in. lbs.).
(3) Install the speaker grill.
(4) Connect the battery negative cable.
REAR SPEAKER
(1) Connect wire harness connector and position
speaker.
(2) Install mounting fasteners.
(3) Install the bulkhead quarter trim panel (Refer
to 23 - BODY/INTERIOR/BULKHEAD TRIM PANEL
- INSTALLATION).
(4) Connect the battery negative cable.
SUB WOOFER
(1) Connect wire harness connector and position
sub woofer.
(2) Install mounting fasteners. Tighten to 6 N·m
(50 in. lbs.).
(3) Install the bulkhead quarter trim panel (Refer
to 23 - BODY/INTERIOR/BULKHEAD TRIM PANEL
- INSTALLATION).
(4) Connect the battery negative cable.
Fig. 11 SUB WOOFER
1 - SUBWOOFER
2 - MOUNTING SCREW
3 - MOUNTING NUT
ZB AUDIO/VIDEO 8A - 11
SPEAKER (Continued)