(7) Install the rear wheelhouse splash shields.
(Refer to 23 - BODY/EXTERIOR/REAR WHEEL-
HOUSE SPLASH SHIELD - INSTALLATION)
Fig. 8 REAR FASCIA TO REAR QUARTER PANEL
1 - FASCIA TO REAR QUARTER PANEL NUT
2 - REAR QUARTER PANEL RETAINER
3 - BODY ASSEMBLY
4 - REAR FASCIA
5 - ROUND SPRING NUT
6 - FASCIA RETAINER
Fig. 9 REAR FASCIA
1 - BODY ASSEMBLY
2 - PUSH PIN
3 - REAR FASCIA
Fig. 10 BACK UP & TURN SIGNAL LAMP REMOVAL
1 - BACK UP & TURN SIGNAL LAMP
2 - U-CLIP
3 - REAR FASCIA
13 - 6 FRAME & BUMPERS ZB
REAR FASCIA (Continued)
To Next Page