Dometic Frigo - Page 10

EN
Operation Frigo
10
Figure 3: Switching on the cooling system, compressor
✓ The display then shows the current loading area temperature (1) and the target
temperature (2), and the cooling system is switched on as required, which is rec-
ognisable by the display of the symbols (3) and (4) on the display.
I
NOTE
With a loading area temperature above +15 °C, initially only the sym-
bol is displayed.
After a delay, the evaporator blower is switched on, which is recognisa-
ble by the display of the symbol on the display.
SET
4
1
32
)ULJR2VERRN6HLWH'RQQHUVWDJ)HEUXDU