Explanation of symbols Frigo
4
10 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
11 Service hotline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
1 Explanation of symbols
!
A
I
2 Safety instructions
The manufacturer accepts no liability for damage in the following cases:
Faulty assembly or connection
Damage to the product resulting from mechanical influences and excess voltage
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in the operating manual
2.1 General safety
Inspection and maintenance instructions must be observed. Failure to observe
these instructions invalidates the warranty.
Please remember that the insulation and cooling fittings change the maximum
payload of the vehicle. If the maximum payload and the seat loads are in use, the
maximum permissible front axle load must also be observed.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
Supplementary information for operating the product.
)ULJR2VERRN6HLWH'RQQHUVWDJ)HEUXDU
To Next Page
Loading...
Need help?
General