Dometic Frigo - Operation; Control Unit Overview

EN
Frigo Operation
7
5Operation
5.1 Control unit
All functions of the cooling system can be operated with the control unit. All relevant
values and settings can be seen on the integrated display.
Figure 1: Control unit overview
The following functions are controlled with the buttons:
Item Button Function description
6 – Increases the value
7 – Reduces the value
8 – Switches the system on and off
13 – Changes the target temperature
– Confirms the set value
14 – Starts manual defrosting
15 – Displays the stored operating hours
SET
6
7
8
14
15
13
21345
91011
12
SET
)ULJR2VERRN6HLWH'RQQHUVWDJ)HEUXDU