Dometic Frigo - Page 16

EN
Operation Frigo
16
Automatic defrosting
An electronic controller starts this process after every complete operating hour.
I
During the defrost cycle, the upper line of the display shows “deF“. The bottom line
of the display shows the target temperature. The following indicators appear on the
display:
After the defrosting process, the system switches back to cooling automatically. This
process can also be seen on the display:
Manual defrosting
The manual defrosting process can be started via the control display as follows:
➤ Press the button for at least 2 seconds.
✓ The defrosting process starts as described in chapter “Automatic defrosting” on
page 16.
NOTE
When transporting or storing moist goods, we recommend using man-
ual defrosting more often (see chapter “Manual defrosting” on page 16).
Air circulation defrosting Hot gas defrosting
Symbol is visible Symbol is visible / flashes during the drip
period
Symbol not visible Symbol is visible
Symbol is visible Symbol not visible/
flashes during the drip period
Symbol not visible
Symbol is visible
Symbol flashes, activation of the blower is delayed after defrosting.
After activation, the symbol is visible
)ULJR2VERRN6HLWH'RQQHUVWDJ)HEUXDU