EasyManua.ls Logo

Dormakaba c-lever pro - User Manual

Dormakaba c-lever pro
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
dormakaba
c-lever pro
Option: TouchGo
HAC Standard fixing - 02/2018
EN
Technical Manual

Table of Contents

Questions and Answers

  • P
    Paul Johnson Jr.Sep 10, 2025
    What to do if Dormakaba c-lever pro Door locks show 'Outside the time window'?
    • K
      Kyle VincentSep 10, 2025
      If your Dormakaba Door locks display 'Outside the time window', check the time profiles.
  • G
    Gwendolyn MunozSep 12, 2025
    What to do if Dormakaba Door locks antenna not connected to e-module power supply?
    • J
      Jonathan BowmanSep 12, 2025
      If the antenna is not connected to the e-module power supply in your Dormakaba Door locks, establish the connection or power supply.
  • D
    Diana JohnsonSep 14, 2025
    What to do if Dormakaba Door locks TimePro function activated?
    • D
      dean35Sep 14, 2025
      If the TimePro function is activated on your Dormakaba Door locks, deactivate it.
  • C
    Cody AnthonySep 16, 2025
    What to do if Dormakaba Door locks have a faulty device/coupling?
    • J
      James Hernandez MDSep 16, 2025
      If you encounter a faulty device/coupling with your Dormakaba Door locks, operate the device again. If the fault recurs, call a qualified technician and use the emergency opening.

Summary

2 Basic Safety Instructions

2.3 Assembly and Installation

Outlines requirements and precautions for product assembly and installation by skilled personnel.

2.4 Service and Maintenance

2.5 ESD Prevention Measures

Provides essential measures to prevent damage from electrostatic discharge to electronic components.

2.6 Handling of Lithium Batteries

3.2 Structure

4 Installation

4.1 Installation Requirements

Covers general, door thickness, and mortise lock requirements for proper installation.

4.2 Replace c-lever with c-lever pro

Step-by-step instructions for replacing an existing c-lever with the c-lever pro model.

4.3 Spindle Standoff

4.4 Drilling Fixing Holes

Provides instructions and guidance for drilling the necessary holes for fixing the unit.

4.4.1 With Drill Jig; Door Side 1

4.4.2 With Drill Jig; Door Side 2

4.4.3 With Drilling Template; Door Side 1

4.4.4 With Drilling Template; Door Side 2

4.5 Installing the Cylinder Support

4.5.2 Inserting the Cylinder Support

4.5.3 Positioning the Cylinder Support

4.6 Preparing the External Fitting

4.8 Inserting and Connecting the Coupling Unit

4.9 Installing the External Fitting

4.9.1 Standard Fixing

Procedure for installing the external fitting using the standard fixing method.

4.10 Determining Screw Length

4.11 Preparing the Internal Fitting

4.12 Installing the Internal Fitting

4.12.1 c-lever Standard Variant

Specific steps for installing the internal fitting for the standard c-lever variant.

4.13 Checking the Installation

4.14.2 Disassembling the External Fitting

5 Programming

5.1 Programming TouchGo Products

Instructions for programming TouchGo products using RCID and RFID technologies.

5.8 Deleting Individual User Media

5.9 Deleting Individual Master Bs

5.10 Deleting All User Media

5.11 INI Reset with Master Media

6 Operation

6.2 Opening with User Media

Step-by-step guide on how to open doors using authorized user media.

7 Maintenance

8 Service

8.2 Replacing Batteries

Step-by-step guide for replacing the device's batteries.

8.3 Replacing the TouchGo Media Battery

8.4 Connecting the Programmer

8.6.1 Reset with Programmer 1460

8.6.2 Reset Using Tweezers

Procedure for resetting the device using conductive tweezers.

8.7 Firmware Update

8.8 Emergency Opening

8.9 Replacing the Antenna

9 Troubleshooting

9.1 Error Analysis

Provides a table for analyzing common symptoms and their possible causes and measures.

9.2 TouchGo Applications Error Analysis

9.2.1 Operation Error Analysis

Analyzes operation errors specific to TouchGo applications based on symptoms and signals.

9.2.2 Programming Error Analysis

Dormakaba c-lever pro Specifications

General IconGeneral
Latchbolt MaterialSteel
Power SupplyBattery
Access MethodRFID, PIN Code
MaterialMetal
DimensionsVaries by model
CommunicationRFID
Suitable forCommercial doors
IdentificationRFID card/fob, PIN code
Door Thickness35mm to 50mm
Lever Handle TypeLever handle
FinishMultiple options available

Related product manuals