Interface
17 10099206-AA
Proles
Depending on the prole previously used, the user interface may display the ‘Select Prole’
screen at start-up. By default, three precongured proles are available. These proles can be
customized and added to as required.
Select Prole
Adminirator Operator Supervisor
The default proles are dened below. The administrator user prole is protected with a default
password off ‘0000’. This can be changed later.
Role Access Level
Administrator
Has access to all system settings, databases and diagnostics. Is
able to create new user proles, upgrade rmware and reset the
system
Supervisor Has access to diagnostics, job select and print adjust features
Operator Access is limited to job selection and print adjust features only
To Next Page
Loading...
